speaker module

• Speaker module notes:
  • need to add an input attenuator - 12k series with 100R pulldown
  • Should probably include a low pass filter
  • Design a custom board with the regulator and additions
  • Get adhesive wire clips
  • Add a led for signal output?
• Make speaker module holes rail wider
• Try to see what a twin notch filter on the output would sound like. It’s very midrange heavy but it’s also a computer speaker
• will all those white 2 pin male terminals fit in the socket of the speaker?
• https://www.taydaelectronics.com/datasheets/files/6909.pdf - speaker datasheet
• https://www.mouser.com/datasheet/2/115/PAM8403-247318.pdf

##

Use these for standoffs for speaker: I just found this on AliExpress: $12.65 | 100pcs SMT SMD nut M2.5 PCB solder nut column spacer SMT Chip Motherboard Embedded Welded PCB Stud
https://a.aliexpress.com/_mqoiTYb

Do a capacitive touch switch that will mute the output and turn the led on